Using a pressure washer to clean your vinyl siding Pressure washers are easy to operate and are perfectly safe to clean your coating, contrary to what you've heard before. The trick is to use a lower water pressure so that water doesn't get behind the coating or damage the surface. I recommend keeping the water pressure in the 1,300-1,600 PSI range when applying soap. By keeping the pressure low, you can familiarize yourself with the pressure washer and check if the pressure is good enough to clean the vinyl coating or if you need to increase the pressure for effective cleaning.
Pressure washing is not good for any soft surface, such as mosquito nets on windows. Vinyl siding is a hard surface, but not as hard as other surfaces, such as brick. This means that you should be careful with pressure washing so as not to damage the coating. Before pressure washing the vinyl coating, it is necessary to inspect it to see if it is damaged in any way.
Some areas get more direct sunlight, while others stay humid for longer periods of time. Any loose coating must be repaired before pressure washing. Special care must be taken to prevent water from being trapped, as moisture will cause mold growth. Special care must also be taken not to spray water directly into the gaps around windows or doors.
Vinyl siding is quite durable, meaning that it can generally withstand the force exerted by pressure washers. Pressure washing vinyl siding is a common cleaning method for this type of material and is also easy to do. The preferred tool for cleaning vinyl siding is a pressure washer. When used properly, it can keep your home fresh and clean.
Spray clean water starting at the top and work your way down to allow the soap to wash off. There are a few things you should know before you pick up that pressure washer and clean your vinyl siding. When used improperly, pressure washers can damage surfaces, especially the most sensitive ones. Making sure to pressure wash your home every year can help prevent serious problems that may arise over time.
To pressure wash the vinyl liner, start with a low pressure setting, such as a PSI between 1300 and 1600, and increase it as needed to remove persistent dirt and grime. In addition, vinyl siding usually lasts a long time, from 10 to 12 years to a few decades, with proper care. The reason why you should be very careful with pressure washing vinyl siding is that there are many hazards if it is damaged. Pressure washing can damage windows, so if the vinyl siding is close to the windows, you need to be very careful.
An injector inside the washing machine will mix the water and soap, providing you with a good soapy solution that will reduce dirt and leave the coating looking like new. But, since stucco and stone are more fragile, it is better to seek professional pressure washing services. In this article, DIY Smarts painter Ask This Old House, Mauro Henrique, reviews all the basics of using a pressure washer to clean the outer vinyl coating. First, explain the basics of a pressure washer and analyze the differences between colored tips when it comes to pressure washing, and why it's extremely important to know what each of them means.
Leave a Comment